Weiman 523 High-Traffic Hardwood Floor Polish & Restorer, 32 Oz

Description

Instantly rejuvenate floors with Weiman Hardwood Floor High Traffic Polish and Restorer. It doesn’t just fade existing scratches, it prevents new ones while imparting a beautiful, high-gloss finish. Removes the appearance of scratches using micro-filling technology. Extends the life of hardwood floors. Creates a protective, scratch resistant layer that prevents new scratches from forming. Bring back the life in your hardwood floors with Weiman High-Traffic Hardwood Polish & Restorer. Specially formulated to instantly rejuvenate hardwood floors. Micro filling technology removes scratches, while a protective, scratch resistant layer prevents new scratches from forming. Leaves a brilliant natural sheen to hardwood floors with no sticky or waxy residue. 2-in-1 Polish and restore for an easy one step process versus using multiple products and additional steps. Weiman high-traffic hardwood polish & restorer is ready to use and requires no mixing, diluting or rinsing which makes cleaning your hardwood floors easy!
Size: 32 ounce
Instantly rejuvenate hardwood floors
Safe for all hardwood floor finishes
Makes floors look like new
Creates a protective and scratch resistant layer while leaving a brilliant sheen
No sticky residue
Micro-filling technology removes the appearance of scratches
Extends life of hardwood floors
Resists scratches and extends the life of wood floors
Scuff resistant finish
Safe on hardwood, stone, tile and laminate floors.
Features:
RESTORE
- Micro filling technology removes scratches, while a protective, scratch resistant layer prevents new scratches from forming
VERSATILE
- Can be used on any finished hardwood surface and easy applied with a mop or worked into a small area
SAFE
- Can be used around kids and pets without causing harm
SIMPLE
- Polish and restore hardwood floors in one easy step
USE ON
- Finished oak, maple, cherry, birch, walnut, hickory, pine, ash, beech, amendoim, mahogany, tigerwood, kempas, teak, bamboo, engineered hardwood, vinyl, laminate and stone tile.
Directions:
Remove debris from floor by sweeping or vacuuming
Squeeze a generous amount of Weiman High-Traffic Hardwood Polish and Restorer directly onto a clean floor using a zigzag motion
Spread evenly with a clean, dry mop
Allow 30 minutes for floor to dry to a high gloss
If a glossier shine is desired, additional coats may be applied. Allow 45-60 minutes in between coats. Do not apply more than three coats in a 24 hour period. Test on an inconspicuous area before use. For best results, clean with Weiman Hardwood Cleaner before polishing.
Do not use on unfinished or unsealed wood floors.
FAQ's:
Can I use this on laminate, ceramic or tile floors?
No, this product is only for use on finished hardwood floors. Our Hardwood Floor Polish and Hardwood Floor cleaner can be used on laminate, ceramic or tile floors.
Can this product be used on bamboo floors?
We do not recommend using this product on bamboo flooring. Please consult the manufacturer for polishing instructions.
Is this product safe to use around kids and pets?
Yes, after the solution has dried it is safe for kids and pets to walk on.
How much surface area does one bottle cover?
Approximately 400 sq. ft.
How often should I use this product?
In typical traffic areas, this product should be applied every 3-4 months. Higher traffic areas may require more frequent applications.
What sort of mop should I use to apply this product? Can I reuse the mop for other things?
We recommend using a microfiber mop for a more even finish. To reuse a mop after using with Weiman Hardwood Polish, wash the mop with ammonia and water.
How do I remove this product?
Weiman High-Traffic Hardwood Floor Polish and Restore can be removed using diluted ammonia solution which can be purchased at most grocery stores and discount retailers. The product is normally labeled as Ammonia or Ammonia All Purpose Cleaner.
Ammonia solution should only be used for occasional removal of polish buildup. It should not be used for day to day cleaning. The solution should first be tested on an inconspicuous area to ensure that it will not cause damage to the floor finish. Do not apply ammonia solution more than two times back-to-back.
Removal instructions will depend somewhat on surface type, please contact us for more specific instructions. Please contact us if you require more specific removal instructions.
How long does it this product take to dry?
Allow 30 minutes for floor to dry to a high gloss. If more gloss is desired, additional coats may be applied. Allow 45-60 minutes in between applications. Do not apply more than three applications in 24 hour period.
Does this product clean floors?
No, this product is designed as a polish and will minimize the appearance of hairline scratches in finished wood flooring. Weiman Hardwood Floor Cleaner should be used to clean the surface prior to applying the polish.
Do I need to clean my floor before using this product?
Yes, you should clean with Weiman Hardwood Floor Cleaner before using this product. Allow the floor to dry completely after cleaning.
What is the fragrance of this product?
This product has a slight acrylic scent.